Legacy G1 Toolbox Software
IMPORTANT NOTE: Firmware updates for G1 codecs are no longer supported, however legacy codec ToolBox software can be downloaded from this page.
Please see the below chart for the complete software version list of all the current codec models.
|
Model |
ToolBox Version |
Chipset |
Algorithm |
Version |
Description |
|
Commander G1 |
DSP |
Music |
2.22 |
||
|
Voice |
1.00 |
||||
|
G.722 |
1.4 |
This version number may not appear on codecs LCD display |
|||
|
CPU |
1.226 |
||||
|
Patriot G1 |
DSP |
Music |
3.25 |
||
|
Voice |
1.09 |
||||
|
CPU |
N/A |
p1.29 |
|||
|
I-Mix G1 |
DSP |
Music |
i1.14.02 |
||
|
G.722 |
i1.04.05 |
||||
|
CPU |
i2.04 |
How do I tell what software versions I have installed on my codec?
Regardless if you have a new G3 codec or an older G1 legacy codec, simply navigate to:
[menu] > [unit details] on your codec.
The LCD will display the current software versions installed on your unit. Please compare the software version displayed on your codec's LCD display to the chart above to see if your unit is out of date and is in the need of an upgrade. If an upgrade is required please click the "I need an upgrade" link below.
How do I tell what ToolBox version I'm running?
For all ToolBox versions excluding the Commander and Patriot G1 models simply:
navigate to Help > about... to display the software version.
Compare the software version with the chart above to establish if you need to upgrade your ToolBox software.
To download simply click the newest ToolBox version in the table above to download the zipped file.